Fein GRIT GXC Manual De Instrucciones página 12

3 94 10 011 00 0.book Seite 12 Montag, 6. August 2007 3:57 15
EN
Symbols, abbreviations and terms
used.
The symbols used in this Instruction Manual and
where necessary on the machine, serve to draw
your attention to possible hazards when work-
ing with this machine.
Symbol Term, meaning
Action
Touching prohibited
General mandatory sign
Read documentation
Use eye-protection
Wear ear protection
Use dust mask
Use protective gloves
Danger warning
European conformity symbol
For your safety.
Do not use this machine before you have
thoroughly read and completely under-
stood this Instruction Manual, including the fig-
ures, specifications and safety regulations.
Please also observe the relevant national indus-
trial safety regulations (e. g. in Germany: BGV
A2, BGR 500).
Non-observance of the safety instructions can lead
to an electric shock, fire and/or severe injuries.
This Instruction Manual should be kept for later
use and enclosed with the machine, should it be
passed on or sold.
Read and observe the Instruction Manual
of the GX 75 belt grinder that is to be
mounted to this machine.
12
For assembly of the cylindrical grinding device to
the belt grinder, use only the fastening material
provided. Faulty assembly can cause the cylindri-
cal grinding device to loosen from the belt
grinder during operation and lead to serious
accidents.
Use safety glasses. The safety glasses must
be capable of protecting against flying par-
ticles generated by the various different opera-
tions.
Before switching on, make sure that no work piece
is inserted in the cylindrical grinding device. The
work piece can be thrown from the machine and
cause serious accidents.
Never touch the running grinding belt. Dan-
ger of injury.
Press the emergency-off switch immediately in
danger situations. The machine runs on for up to
50 seconds.
Clean the ventilation slots of the machine regu-
larly. The motor fan draws dust into the housing.
Excessive accumulation of metal dust can cause
electrical dangers.
The mains plug of the machine may be mounted
only by a qualified electrician. The protective
conductor in the mains socket outlet must be
connected with the protective earthing of the
mains supply.
Pull out the mains plug for maintenance and
repair! Switching the machine on unintentionally
can lead to serious injuries.
Have the electrical safety of the machine checked
regularly in accordance with statutory regula-
tions. For machines that have not been checked,
there may be danger of electrical shock!
Check the rotation direction of the motor before
starting the operation of the machine for the first
time. If the rotation direction of the motor is
incorrect, the workpiece can be thrown from
the machine and cause an accident. The rotation
direction may be changed only by a qualified
electrician.
Always work with great attention and care, espe-
cially when guiding in and removing the working
material. Diminishing attention can lead to seri-
ous injuries of your hands.
GXC