Denver Electronics JST-9200 Manual Del Usuario página 3

9 Plug
10 Battery
indicator
11 Force
button
Recharging the Jump Starter
Connect the jump starter via micro USB cable to the power source.
1.
2. Press the ON/OFF button to turn on the product. While charging the
jump starter, the battery level indicator flashes. Once it is fully
charged, all 4 battery level indicators will light up.
Unplug the cable when no charge is required.
3.
Note:
When using the product for the first time, make sure that the jump

starter is fully charged.
Use the supplied micro USB cable to charge the product.

Wall adapter is not included.

Charging Your Phone or Other Products with the Jump Starter
1. Connect the jump starter and your phone or other electronic devices
via USB cable.
2. Press the ON/OFF button to turn the product on.
3. Unplug the cable when no charge is required.
Insert plug in jump start port.
clamp Shows the status of the smart battery clamp.
start Press this button if the car battery voltage is too low.