Publicidad
Idiomas disponibles
Idiomas disponibles
GIE.book Seite 11 Dienstag, 20. Juni 2006 8:45 08
GIE
Never touch rotating brushes, sanding or
polishing tools. Danger of injury.
Press the emergency-off switch immediately in
danger situations. The machine runs on for up to
50 seconds.
Clean the ventilation slots of the machine regu-
larly. The motor fan draws dust into the housing.
Excessive accumulation of metal dust can cause
electrical dangers.
Make sure that the machine stands securely and
has a level set up position. The machine must be
fastened firmly to its undercarriage or sub-base. If
the machine tips over during operation, serious
injuries can result.
The mains plug of the machine may be mounted
only by a qualified electrician. The protective
conductor in the mains socket outlet must be
connected with the protective earthing of the
mains supply.
Pull out the mains plug for maintenance and
repair! Switching the machine on unintentionally
can lead to serious injuries.
Have the electrical safety of the machine checked
regularly in accordance with statutory regula-
tions. For machines that have not been checked,
there may be danger of electrical shock!
Check the rotation direction of the motor before
starting the operation of the machine for the first
time. If the rotation direction of the motor is
incorrect, the workpiece can be thrown from
the machine and cause an accident. The rotation
direction may be changed only by a qualified
electrician.
The machine must not be operated only with a sin-
gle brush, sanding or polishing tool. Always mount
application tools in pairs. When using single
application tools, the working area is not suffi-
ciently covered.
At a glance.
1 Emergency OFF pushbutton
2 On/Off switch
3 Speed switch
4 Spark guard
5 Spark guard wing bolts
6 Brushes, sanding or polishing tools
7 Grinding rest
8 Fastening screws for sanding/polishing rest
9 Star-knob bolt for gap adjustment
10 Ventilation slots
11 Tool holder
12 Clamping washer
13 Spring washer
14 Clamping screw
15 Protective cover
16 Screw for protective cover
17 Connection sleeve for dust extraction
18 Drill hole
19 Pin
Intended use of the machine.
The machine is intended for stationary deburr-
ing and polishing of metal materials using manu-
facturer approved brushes, sanding and
polishing tools. The machine is not permitted for
operation with grinding discs.
Mounting instructions.
Fasten the machine onto the GRIT GIXBE, GIXS
undercarriage (see mounting instructions). The
fastening of both the undercarriage to the floor
and the machine to the undercarriage must be
suitable to withstand the forces occurring during
working.
Use appropriate screw connections (size,
length) for mounting.
Electrical connection.
The electrical connection, which is to be
provided by customer, must be carried out
by a qualified electrician.
Observe mains voltage: The mains voltage and
the frequency of the power source must agree
with the data on the type plate of the machine.
Before starting operation for the first time,
check the rotation direction of the motor. The
rotation direction may be changed only by a
qualified electrician.
EN
11
Publicidad
