Features Explanation; Monitoring Baby Silently - Philips SBCSC464/84 Modo De Empleo

Features explanation

Avoiding interference
•
If there is interference or if sound reception is poor, switch both units to
another channel.
Always make sure that the channel selection switches (4 and 10) on both
units are set to the same position.

Monitoring baby silently

•
Adjust the volume on the Parent Unit to the lowest level using the
VOLUME ON/OFF control (14) (do not switch off).
> The sound-level lights (9) visually alert you to baby's sounds.The more
sound your baby makes, the more lights light.
Checking that the units are in touch
•
Check that the digital SYSTEM CHECK light (11) on the Parent Unit
LEVEL
lights continuously (green) to confirm that the connection between both
units is reliable.
If the light flashes (red), move the Parent Unit closer to the Baby Unit.
SYSTEM CHEC K
The light flashes if the units are out of range for more than 30 seconds or if
there is interference.
Switching on the system check alarm
You can switch on the system check alarm on the Parent Unit that beeps
when the units are not in touch.The Parent Unit is delivered with the
system check alarm switched off.
1
Open the Parent Unit's battery compartment cover (17).
2
Set the switch (18) inside compartment to the ON position (
+ + + +
+ +
3
Close battery compartment cover (17).
+ +
+
The SYSTEM CHECK light (11) can still flash even if the system check alarm
is switched off.
Range 200m in open air
The baby monitor has an operating range of up to 200 metres in ideal
open-air conditions.This means that the units can see each other with no
obstacles in between. Walls, ceilings, large objects and even glass affect the
operating range.The more obstacles there are in between, the shorter the
operating range.
ENGLISH
7
).