Getting Your Baby Monitor Ready; Using Your Baby Monitor - Philips SBCSC464/84 Modo De Empleo

ENGLISH
6
POWER
I
17 Battery compartment cover
18 System check alarm switch
Switches the System Check Alarm on and off.
The alarm beeps when the units are not in contact.

Getting your baby monitor ready

1
Position the Baby Unit at least three feet (one metre) away from your baby.
Never place the Baby Unit inside the baby's bed or playpen.
2
Set channel selection switches (4 and 10) to the same channel on both
units.
3
Connect the power adapter (6) to Baby Unit socket (1).
4
Plug the power adapter into mains supply.
5
Move away from the Baby Unit with the Parent Unit.
If units are positioned too close to each other then a high-pitched noise
can be heard
6
Connect the second power adapter (12) to the Parent Unit 's socket (16).
7
Plug the second power adapter into a mains supply.

Using your baby monitor

Listening to your baby
1
Push the power button (2) on the Baby Unit to turn it on.
> The power light (3) lights (green).
2
Adjust the microphone sensitivity of the Baby Unit to a level you prefer
(using your own voice as a sound reference).
> The power light (3) lights (yellow) when a sound is picked up.
3
Switch the Parent Unit on and adjust the volume to level you prefer using
the VOLUME ON/OFF control (14).
> The digital SYSTEM CHECK light (11) lights continuously (green) when
the Parent Unit and Baby Unit are in touch with each other.