ChargingTheShaver - Panasonic ES‑RT53 Instrucciones De Funcionamiento

Charge

Chargingtheshaver

1
1
Inserttheappliancepluginto
theshaver.
2
2
Plugintheadaptorintoa
householdoutlet.
• Turn the shaver off before attaching.
• Charging is completed after approx. 1 hour.
• If the shape of the plug does not fit the power
outlet, use an attachment plug adaptor of the
proper configuration.
You cannot operate the shaver while charging.
ReadingtheLCDpanelortheLEDdisplaywhencharging
While charging
ES‑RT53
The charge status ( ) glows.
The LCD panel shows the
remaining battery capacity
from 0% to 100%, in 20%
increments.
2
1
ES‑RT33
The charge status lamp ( )
glows.
After charging is completed
ES‑RT53
The battery capacity and the
charge status ( ) will light up
and then turn off after 5 seconds.
• Recommended ambient temperature for charging is 0 – 35 °C
(32 – 95 °F). The batteries may not charge properly or not at all
under extreme low or high temperatures.
After charging is completed, turning the power switch
ES‑RT53
ON with the shaver plugged in will cause the battery
capacity and the charge status (
then turn off after 5 seconds. This shows that the
shaver is fully charged.
When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
charge status (
the operating time may shorten. Please charge it for
more than 8 hours in such cases.
After charging is completed, turning the power switch
ES‑RT33
ON with the shaver plugged in will cause the charge
status lamp ( ) to light up and then turn off after 5
seconds. This shows that the shaver is fully charged.
When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
charge status lamp (
minutes, or the operating time may shorten. Please
charge it for more than 8 hours in such cases.
ES‑RT33
After charging is completed,
the charge status lamp (
turns off after 5 seconds.
) to light up and
) may not glow for a few minutes, or
) may not glow for a few
)
5