Information About The Batteries; Installation Of The Wall Bracket - Silvercrest SAS 7.4 LI B3 Instrucciones De Uso

Information about the batteries

1) This handheld vacuum cleaner is powered by rechargeable lithium-ion batteries .
2) For care of the batteries, we recommend the following: Once the batteries
have been charged, disconnect the mains adapter
Do not reconnect the mains adapter
held vacuum cleaner's suction power has noticeably decreased .

Installation of the wall bracket

DANGER – ELECTRIC SHOCK!
► Ensure that there are no power cables or other conduits or pipes in the wall
at the location where you intend to bore the holes for the wall bracket
Drilling into a current-carrying electric cable can be potentially fatal!
1) Place the barrel plug
shown in the diagram . Secure the barrel plug
2) Select a suitable installation location for the wall bracket
It must be possible to remove the handheld vacuum cleaner easily and there
must be an accessible mains power socket for the mains adapter
3) Drill two holes about 61 mm apart . Use the wall bracket
holes, to ensure the correct spacing . The drill holes must be suitable for 5 mm
wall plugs .
4) Push the wall plugs
firmly into place using the screws
5) You can place the nozzles on the accessories holder on the side .
6) Connect the mains adapter
■ 50 │ GB │ MT
with the mains socket until the hand-
4
of the mains adapter
5
into the holes and then screw the wall bracket
r
.
e
to a mains power socket .
4
from the mains socket .
4
into the wall bracket
4
by turning it .
5
:
3
4
to mark the
3
SAS 7.4 LI B3
.
3
as
3
.
3