Assembly Instructions; Luxur Y-Lift - La-Z-Boy Luxury-Lift Instrucciones De Operación

Luxur y-Lift

Assembly Instructions:

6. Lift the back upholster y cover to locate and identify the connectors. Do not
connect until instructed.
• The two large, rectangular, 20-pin connectors are the Motor Power
connectors (F 7).
IGURE
• The two round connectors are the Hand Wand connectors (F
• The two small, rectangular connectors are either the heat or the heat
and massage connectors, depending on the style of your chair. The 1LL
lift chairs have heat in the back and seat, and the 1LM lift chairs have
heat and massage in the back and seat.
• The 1LL lift chairs have two small, rectangular, 2-pin connectors
for the warming pads (not shown).
• The 1LM lift chairs have two small, rectangular, 8-pin connectors
for the warming pads and massage motors (F
7. Connect the Motor Power connectors.
• Align the clips on the connectors and push the connectors together
until they lock (F 8).
IGURE
8. Connect the Hand Wand connectors.
• Align the connectors and push the connectors tightly together (F
9. Connect the heat or the heat and massage connectors.
• Align the clips on the connectors and push the connectors together
until they lock (F 8).
IGURE
• Tuck all connections inside the back.
10. From the front of the chair, push the black nonwoven flap with fastening
tape, between the seat and the back, toward the back of the chair
(F 9). Roll the chair onto its back.
IGURE
11. Attach the black nonwoven flap to the back seat spring rail, to form a
pocket between the seat and the back that prevents objects from falling
into the mechanism.
• Locate the fastening tape on the black nonwoven flap and the fastening
tape on the back seat spring rail (F
back seat spring rail faces the back of the chair and is not easily visible.
• You can locate the fastening tape on the back seat spring rail
by feeling under the rail (F
and looking under the back seat spring rail (F
• Attach the black nonwoven flap to the back seat spring rail by pressing
the fastening tape together, working from the center out (F
• Lift the elastic bands to connect the ends of the fastening tape.
• Return the lift chair to the upright position.
WARNING
– To reduce the risk of serious injur y:
• Provide a clear path for operation of the back and legrest. Place
tables and area rugs at a distance to allow the legrest to fully extend
without rubbing or interference.
12. Choose a location for the lift chair that is close to an electrical outlet.
(Assembly Instructions Continued)
8
® Power Recliner
IGURE
7).
IGURE
10). The fastening tape on the
IGURE
11), or by laying on the floor
IGURE
12).
IGURE
IGURE
F
IGURE
7).
Motor
Power
Connector
8).
IGURE
F
IGURE
Black Nonwoven Flap
with Fastening Tape
F
12).
IGURE
Back Seat
Spring Rail
Luxur y-Lift ® Power Recliner
Assembly Details:
7 F
Heat and
Hand Wand Hand Wand
Massage
Connector Connection
Connector
F
9
Back Seat
Spring Rail
F
11
Back Seat
Black Nonwoven Flap
Spring Rail
with Fastening Tape
8
IGURE
Motor Heat and
Power Massage
Connection Connection
10
IGURE
Front
Back of Chair
Black Nonwoven Flap
with Fastening Tape
12
IGURE
Black Nonwoven Flap
with Fastening Tape
9