La-Z-Boy Luxury-Lift Instrucciones De Operación página 8

Luxur y-Lift
Operating Instructions:
Automatic Homing Feature
The automatic homing feature returns the lift chair to the seated position
after power is restored following a power interruption. In a power outage, or
if the power transformer is disconnected from the chair, the chair will return
to the seated position when power is restored, to reset the motors.
1LL Lift Chair Heat Functions and Automatic Timer Operation
The heat system has an automatic timer that will shut off the HEAT functions
after approximately 30 minutes of operation.
• Pressing the HEAT BACK button will start the heat in the lumbar area.
• Press the HEAT BACK button once for low heat, indicated by a
green LED.
• Press the HEAT BACK button twice for high heat, indicated by
a red LED.
• Pressing the HEAT SEAT button will start the heat in the upper thigh area.
• Press the HEAT SEAT button once for low heat, indicated by a
green LED.
• Press the HEAT SEAT button twice for high heat, indicated by
a red LED.
• To turn off the heat functions, press the heat buttons that are activated.
The function is off when the LED is off.
• The heat cycle will temporarily stop when using the UP or DOWN
function, but will resume when the UP or DOWN function is complete.
1LM Lift Chair Heat and Massage Functions and Automatic Timer Operation
The heat and massage systems have an automatic timer that will shut off the
HEAT and MASSAGE functions after approximately 30 minutes of operation.
• Pressing the MASSAGE button will start the massage.
• Press the MASSAGE button once for low speed, indicated by a
green LED.
• Press the MASSAGE button twice for medium speed, indicated
by an amber LED.
• Press the MASSAGE button three times for high speed, indicated
by a red LED.
• Pressing the HEAT BACK button will start the heat in the lumbar area.
• Press the HEAT BACK button once for low heat, indicated by a
green LED.
• Press the HEAT BACK button twice for high heat, indicated by
a red LED.
• Pressing the HEAT SEAT button will start the heat in the upper thigh area.
• Press the HEAT SEAT button once for low heat, indicated by a
green LED.
• Press the HEAT SEAT button twice for high heat, indicated by
a red LED.
• To turn off the heat and massage functions, press the heat and massage
buttons that are activated. The function is off when the LED is off.
• The heat and massage cycles will temporarily stop when using the UP or
DOWN function, but will resume when the UP or DOWN function is complete.
14
®
Power Recliner
®
Luxur y-Lift
Operating Instructions:
Press and hold the
toggle lever UP to
raise the chair.
Press and hold the
toggle lever UP to
return to the seated
position from the
reclined position.
Press button once
to activate low
heat (green LED) in
the lumbar area.
Press button twice
to activate high
heat (red LED) in
the lumbar area.
Press button once for
low speed 6-motor
massage (green LED).
Press button twice for
medium speed 6-motor
massage (amber LED).
Press button three times
for high speed 6-motor
massage (red LED).
WARNING
- To reduce the risk of serious injur y:
• Do not use unit if power control is damaged or wet. Do not use unit if
the hand wand has been dropped in water or any liquid. Contact
your La-Z-Boy ® dealer for ser vice.
LUXURY-LIFT ® POWER RECLINER POWER TRANSFORMER SPECIFICATIONS:
Input: AC 120V 60 Hz 80 W
Output: AC 12V 2.0A-DC 27V 1.2A
Power Recliner
Press and hold the
toggle lever DOWN
to lower the chair to
the seated position.
Press and hold the
toggle lever DOWN to
raise the legrest and
recline the chair back.
Press button once to
activate low heat
(green LED) in the
upper thigh area.
Press button twice to
activate high heat
(red LED) in the
upper thigh area.
15