OHAUS Adventurer Pro AV53M Suplemento Del Manual De Instrucciones página 5

All manuals and user guides at all-guides.com
Adventurer Pro - EC Type-Approved
Introduction
This document is a supplement to the Instruction Manual provided with the
Adventurer Pro balance. It is intended to provide information specific to the EC type-
approved models. For all other information, refer to the Instruction Manual.
Setting the Balance for Type-Approved Operation
Press and hold the Menu-Cal button until MENU is displayed. Move to the Setup
Sub-menu using the No button. When SETUP is displayed, press the Yes button to
enter the Setup Sub-menu. When LEGAL TRADE is displayed, press the Yes button
to view the setting OFF. Press the Yes button to change the setting to OIML. Press
the Exit button to store the setting and return to the current weighing mode.
Note: Before setting the balance for type-approved operation, enter the Menu to
perform a calibration and make any desired balance setting adjustments. Once
the balance is set for type-approved operation, the following conditions apply:
• The Calibrate Sub-menu is hidden and not available.
• In the Setup Sub-menu, the Legal Trade menu item is locked.
• In the Setup Sub-menu, the Auto Zero (AZSM) menu item is set to 0.5d and
locked.
• In the Readout Sub-menu, the Gross Indicator menu item setting is locked.
• The Mode Sub-menu is locked.
• In the Unit Sub-menu, the Unit menu items are restricted to Systems
International units.
• In the Print Sub-menu, the Output When Stable menu item is set to ON and
locked.
• In the Print Sub-menu, the Continuous setting in the Auto Print menu item is
hidden and not available.
• In the Reset Sub-menu, the Reset Readout, Reset Mode, Reset Unit and Reset
Global menu items are locked.
• In the Lockout Sub-menu, the Calibration menu item is locked.
EN-1