Kohler K-14434 Guia De Instalacion página 9

Faucet Body
7. Single Control Link Installation
Identify the best hole in the link to allow full operation of the
drain rod and the lifting rod.
Align the link hole with the drain rod and slide the clip and the
link onto the drain rod with the thumbscrew facing the back of
the bidet.
To move the link to the proper position, squeeze the clip and
slide it along the rod.
If not already down, push the drain rod down to the open drain
position.
If required, loosen the thumbscrew on the link.
Align the link with faucet lifting rod and push the lift rod
through the holes in the link.
Ensure that the drain knob is at the bottom of the slot in the back
of the faucet.
With both the drain knob and the drain rod fully down, tighten
the thumbscrew on the lifting rod.
Test operation of the drain knob.
Kohler Co.
Drain Knob
Lift Rod
Thumbscrew
Link
Clip
Drain Rod
9 1032027-2-B