Biomimetic Adjustment - Blatchford Elan Serie Manual De Instrucciones

Biomimetic Adjustment

Note: Carry out static alignment while ensuring the user has some means of support
such as parallel bars. This is standing alignment only.
Check the Bench Alignment and the heel height
Adjust the angle
of the foot at the
distal pyramid
interface
Use shift for static alignment and standing. The device should encourage some degree of self adjustment to
achieve a sense of balance for the user during standing.
Start Static
alignment
User standing upright
with weight evenly
distributed on each foot
is user in
a stable position?
(using minimal
muscle control)
Can the user
NO
dorsiflex the
ankle approx.
3 degrees ?
Allow the user to become
accustomed to the setup
before continuing
NO
YES
On-screen
Alignment Vector
YES
Dynamic Alignment
17
Use the PC interface to reset
the resistance settings
* e.g shift foot slightly tilt using
proximal and distal interfaces
falling
backwards forwards
*Shift foot *Shift foot
backwards
relative to relative to
socket
Refer to
Dynamic
Continue
to
938317S/3-0719
falling
forwards
socket