Tool Usage And Duty Of Care - Monti MBX Bristle Blaster Electric 3200X Manual De Instrucciones

Operating instructions
GB
4.2

Tool usage and duty of care

®
1. After fitting MBX
wrench. Always ensure the hex socket wrench is removed prior to switching on the tool.
2.
Prevent unintentional starting of the tool.
Ensure the starter switch is not actuated on connection to the power supply.
3.
Exercise care. Handle tool with care. Use your common sense.
4. Never operate this or any other tool when you are tired.
5.
Work at a distance to ensure other individuals cannot be injured by objects thrown off. During operation, nobody
should stand in front of or beside the user.
6. Maintain tool carefully. Follow the instructions on the replacement of accessories.
operation and 6.1 Servicing).
7.
When not in use, prior to servicing and on changing accessories, switch off tool and disconnect from the power
supply.
8.
Prior to the replacement and inspection of
belt, the tool is to be isolated from the power supply. Do not perform any servicing work on the tool as long as it
is connected to the power supply.
®
9. MBX
Never touch
10.
Regularly check electrical cables and replace if damaged. Keep vertical handle and tool body dry, clean and free
of oil and grease. A soiled housing and/or handle can cause accidents.
11. Always use the tool at the stipulated voltage. A different voltage may damage the tool or cause injuries.
12. Always keep the tool and accessories clean to obtain an effective result from your work. Following the instruc-
tions on the servicing of the tool and on changing the accessories. Regularly check the electrical cable and
replace it if it is damaged. Regularly clean the fan with a compressed air gun to ensure correct air circulation in
the machine.
Further information on health and safety at work is available from the following web sites:
http://europe.osha.eu.int (Europe)
For more information please contact info@processaids.in or visit www.processaids.in
16
accessories such as the adapter system and Bristle Blaster
Never carry the connected tool with your hand on the starter switch.
®
Bristle Blaster belt as long as the tool is in operation.
http://www.osha.gov (USA)
®
MBX
accessories, such as the adapter system and Bristle Blaster
® ®
MBX Bristle Blaster Electric 3200X
®
belt, always remove hex socket
(See section 5 Placing in
®