Monti MBX Bristle Blaster Electric 3200X Manual De Instrucciones página 21

® ®
MBX Bristle Blaster Electric 3200X
Correct direction of
operation
If the tool does not work correctly, check the following:
Are you using a suitable MBX
Is the tool operating at the stipulated speed? – Problems with the tool, see section 8, Troubleshooting.
Are you using an MBX
direction (see section 5, Placing in operation, Fig. 2).
®
Is the MBX accelerator bar showing signs of wear? Check MBX
approx. 45° or renew.
For more information please contact info@processaids.in or visit www.processaids.in
Less contact pressure = longer service
life and higher performance
Holding machine
®
belt for the surface to be machined? – Use the most suitable MBX
®
belt with the wrong direction of travel? – Fit the brush belt such that is runs in the correct
Operating instructions
Observe the correct working position!
Angle machining
®
accelerator bar. In case of wear, rotate by
GB
®
belt.
19