Installation - Wilo Smart Gateway Instrucciones De Instalación Y Funcionamiento

Installation and electrical connection
DANGER
Risk of fatal electrical shock!
• Exclude risks from electrical current.
• Local directives or general directives [e.g. IEC, VDE, etc.] and instructions from
local energy supply companies must be adhered to.
DANGER
Risk of fatal electrical shock!
The Wilo-Smart Gateway is an installation device.
• To ensure sufficient protection against unpermitted touching of live parts, cover
the terminal area after installation and electrical connection.
To this end, install the Wilo-Smart Gateway in a switch cabinet or distributor box.
WARNING
Personal injury!
• Adhere to existing accident prevention regulations.
7.1

Installation

NOTICE
Only install the Wilo-Smart Gateways on DIN rails/top-hat rails according to
EN 60715.
The installation must be done horizontally.
For sufficient convection, a minimum clearance to other modules of 30 mm above
and below the Gateway is to be maintained.
Gateways may only be installed in housings with an IP protection class sufficient for
operation.
Adhere to the local regulations!
ƒ
Installation and operating instructions Wilo-Smart Gateway
Snap the Wilo-Smart Gateway onto a 35 mm DIN rail in accordance to EN 60715
(Fig. 3).
en
31