Wilo Smart Gateway Instrucciones De Instalación Y Funcionamiento página 36

en Commissioning
This may also disrupt the functionality of an overall system that depends on these
devices.
To rule out such unwanted impacts of online control, the default setting for all
users was set to "read only".
When these access rights are changed to "read and write" by the Gateway owner
or by an administrator appointed by the Gateway owner, a user is authorised to in-
fluence all settings and functions of a connected device online.
For this reason, write permissions may only be granted to experienced users who
are able to gauge the effects that changing operating states on the devices may
have.
In order to put the Gateway into operation and make it accessible to someone using
the Wilo-Smart connect app, the following requirements are needed:
ƒ
ƒ
PC/Laptop
The PC/laptop requires an Ethernet interface with IP protocol. The protocol must be
set so that the IP address is obtained via DHCP (standard configuration).
The PC/laptop is connected to the Gateway LAN 1 connection with a network cable
(patch cable, RJ45 plug).
The Wilo-Smart Gateway is configured using a web browser.
The Wilo-Smart Gateway distributes an IP address from the address space
192.168.10.x/24 to the connected devices via DHCP.
The Wilo-Smart Gateway can then be reached via the address 192.168.10.1.
Enter "http://192.168.10.1" in the address line of the web browser in order to reach
the web interface.
Fig. 1: Web browser
The Wilo-Smart Gateway status page can be viewed by anyone at any time, but the
configuration pages require a login. When in the delivery state, the login details are:
ƒ
ƒ
Before accessing the Internet and therefore the Wilo-Smart Cloud via the LAN 2 con-
nection, it is necessary to set the required IP protocols in the web interface.
To prevent unauthorised access, the password for accessing the web interface can be
changed in the web interface itself. This password only affects the local login to the
Gateway web interface via LAN 1. The web interface is not accessible via the LAN 2
connection.
36
PC/laptop with wired Ethernet connection and a
Smartphone or tablet with an iOS or Android operating system
User: admin
Password: admin
WILO SE 2020-09