Personnel Qualifications; Danger In The Event Of Non-Observance Of The Safety Instructions; Safety Instructions For The Operator - Wilo CIF-Module Instrucciones De Instalación Y Funcionamiento

Safety
2.2

Personnel qualifications

Personnel must:
ƒ
ƒ
Personnel must have the following qualifications.
ƒ
ƒ
Definition of "qualified electrician"
A qualified electrician is a person with appropriate technical education, knowledge
and experience who can identify and prevent electrical hazards.
2.3

Danger in the event of non-observance of the safety instructions

Non-observance of the safety instructions can result in risk of injury to persons and
damage to product/unit. Non-observance of the safety instructions will render any
claims for damages null and void. In particular, non-observance can, for example, re-
sult in the following risks:
ƒ
ƒ
ƒ
ƒ
ƒ
2.4

Safety instructions for the operator

Adhere to existing accident prevention regulations! Avoid dangers caused by elec-
trical currents! Local directives and general directives [e.g. IEC, VDE, etc.] and instruc-
tions from local energy supply companies must be adhered to!
This device can be used by children from 8 years of age as well as people with reduced
physical, sensory or mental capacities or lack of experience and knowledge if they are
supervised or instructed on the safe use of the device and they understand the
Installation and operating instructions Wilo-CIF-Module
General danger symbol
Danger of electric voltage
Warning – hot surfaces
Notes
Be instructed about locally applicable regulations governing accident prevention.
Have read and understood the installation and operating instructions.
Electrical work: Electrical work must be performed by a qualified electrician.
Installation/dismantling work: The installation/dismantling must be carried out by
a qualified technician who is trained in the use of the necessary tools and fixation
materials.
Danger to persons due to electrical, mechanical and bacteriological factors
Damage to the environment due to leakage of hazardous materials
Damage to property
Failure of important product/unit functions
Failure of required maintenance and repair procedures
en
15