Getting Started - Design TRAXON MOOD LIGHT Manual De Utilización & Garantía

THE MOOD-LIGHT 'object'
This Operation Manual provides important information on how to use the Mood-Light 'object'. Please read the Operation
Manual carefully and follow all the steps to get started.
Contents / Accessories:
1) Mood-Light 'object'
2) Remote Control
3) 2 x AAA Batteries
4) AC/DC Power Adaptor
5) Operation Manual

GETTING STARTED

A) Installation
1) Connect the Power Adaptor to the Mood-Light 'object' and to the socket.
2) Insert two AAA Batteries into the Remote Control.
3) The Mood-Light 'object' has built-in rechargeable batteries. Keep the Mood-Light 'object' connected to the power adaptor
for about 24 hours to fully charge the batteries before use.
Once the Mood-Light 'object' is fully charged, you can disconnect it and operate it without connecting the power adaptor
for 6-10 hours. Optionally, you can keep the Mood-Light 'object' connected to the power adaptor, while it's on.
When the batteries are low, the Mood-Light 'object' will turn off and the batteries must be recharged (see insert for charging
instructions). Connect the power adaptor and charge the Mood-Light 'object' again. The Mood-Light 'object' should be
off while charging.
NOTE: The Mood-Light 'object' is controlled by RF (radio frequency) and can be operated by remote control with a distance
of up to 10 meters.
Caution: The Mood-Light 'object' is not waterproof. Do not place the Mood-Light 'object' in water or put it in
the dishwasher, as doing so may damage internal parts. You may fill the Mood-Light 'object' with water or ice. Clean
with wet cloth only.
0 6