Press RAY (F5) again to change to White.
Press RAY (F5) again to change to random colors.
Press SPEED (+) or (-) to increase or decrease the speed of the Ray Function.
To stop the Ray Function and start another mode - press any other button.
6) Moments
The Moments Function is a series of flowing color sequences, with pauses in between.
Press MOMENTS (F6) on the remote control to start the Moments Function.
Press SPEED (+) or (-) to decrease or increase the off periods and the speed of the sequences.
To stop the Moments Function and start another mode - press any other button.
D) Pause Mode
You can pause during any sequence or function at any time to hold a current color or light display.
Press PAUSE (P1) on the remote control to pause.
Optionally, you can press the MEMORY (M1) button on the remote control as described in 'Save a Color' to save the current
color display.
To stop the Pause Function and start another mode - press any other button.
CARE AND MAINTENANCE
The Mood-Light 'object' is a product of superior design and quality and should be treated with care. The suggestions below
will help you to fulfill any warranty obligations and to enjoy this product for many years.
When using the Mood-Light 'object':
- Make sure it is properly and securely positioned.
- Do not place the Mood-Light 'object' under water.
- Keep it and all its parts out of children's reach.
- Use indoors only.
- Do not use or store it in dusty or dirty area - the lighting parts can lose brightness.
- Do not install or store in hot areas. High temperatures can shorten the life of electronic items, damage batteries, and warp
or melt certain plastics.
- Do not attempt to open, alter, or tamper with the Mood-Light 'object'. Non-expert handling may damage the unit and
may cause injury to the user.
- Do not tamper with or replace any internal parts.
- Do not drop, knock, or shake the Mood-Light 'object'. Rough handling can break internal circuit boards and lights.
1
0