Weighted Data Entry Method - Citizen SR-260N Manual De Instrucciones

Step 3 : Enter ED mode, then view data by [ DATA ] or [ = ], where
those data are still data 1 = 2.00, data 2~5 = 5.00, data 6~8
= 9.00.
(Ex.7) : Based on Ex.1, enter 5 x 5 and delete it.
Step 1 : Press 5 [ x ] 5 [ 2ndF ] [ DEL ]
Step 2 : Press any key to clear it
Step 3 : Enter ED mode, then view data by [ DATA ] or [ = ], where
those data are changed as data 1 = 2.00, data 2~4 = 9.00.

Weighted data entry method

Instead of entering directly each data, when often several item of data
have the same value, you can enter the value and the number of
occurrences up to 255. The data based on Ex.1 can be rewritten and
entered as follow :
Value Number of occurrences
2 1
5 4
9 3
, where data 1 = 2, data 2~5 = 5, data 6~8 = 9.
Under ED mode, when you continue choosing a value from data 2~5
and correcting it as 33, the permutation among those data will be
changed as data 1 = 2, data 2~4 = 5, data 5 = 33, data 6~8 = 9, where
the new value 33 is inserted after data 4 = 5.
(Note) : A "FULL" is indicated when any of the following conditions
occur and further data entry becomes impossible. Just
pressing any key can clear the indicator. The previous data
entries are still retained unless exiting STAT mode.
1) If the times of data entry by [ DATA ] is more than 80
2) The number of occurrences is more than 255
3) n ＞ 20400 (n = 20400 appears when the times of data entry
by [ DATA ] are up to 80 and the number of occurrences for
each value are all 255, i.e. 20400 = 80 x 255.)
SR-260N_English_090324.rtf SIZE: 135x75mm
DEG
dEL Error
DEG
0. 0 0
Alternative method
[ DATA ] 2
[ DATA ] 5 [ x ] 4
[ DATA ] 9 [ x ] 3
E19
/ SCALE 2:1 / 2009/3/24
STAT
STAT