Before Using For The First Time - Krups PRECISION BW501C31 Manual De Instrucciones

IFU_KR_KETTLES_PRECISION_NC00017283_Mise en page 1 01/06/10 14:21 Page11
English

BEFORE USING FOR THE FIRST TIME

n Remove all the packaging, stickers and various accessories both inside
and outside of the kettle.
n Adjust the length of the cord by coiling it under the base. Pinch the cord
in the slot. (fig. 1)
n Rinse the inside of your kettle and filter separately. Boil 2 or 3 kettlefuls.
Discard the water from these first two/three uses as it may contain
dust.
USE
1) Place the base on a smooth, clean and cold surface.

Your kettle must only be used with its own base and its own anti-lime
scale filter
2) To open the lid:
n Remove the lid by turning to the left and lifting (fig. 2)
n To lock the lid, click it on and turn right.
3) Fill the kettle with the desired amount of water. (fig. 3).

You can fill it by the spout by pressing on the trigger, which ensures
better maintenance of the filter.

Never fill the kettle when it is on its base.

Do not fill it above the maximum level or below the minimum level. If the
kettle is overfilled, boiling water may be ejected.

Do not use without water.

Check that the lid is properly closed before use.
4) Place the kettle on its base (fig. 4) connected to the mains.
When the kettle is plugged in, a beep sounds and the screen lights up.
Familiarise yourself with the display and the various functions of the
kettle by referring to figures 6 and 7:
Electronic base (fig. 6):
A. ON/OFF button
B. Keep warm button
C. +/- button for the choice of temperature and duration of the keep
warm cycle
D. Digital display
11