Dust Bag Replacement - Kenmore 116.31069 Manual De Uso Y Cuidado

DUST BAG REPLACEMENT J
WARNING
Always unplug power cord from
electrical outlet before performing
maintenance to the vacuum cleaner.
TO REMOVE DUST BAG
Dust Bag
Cover Latch
Pull on the dust bag cover latch located
on the side of the bag cover.
Grasp the dUSt bag collar and pull
gently, carefully removing the dust bag
from dust bag
o,0er.
Throw away
the used dust
bag.
Do not reuse
dust bag.
Bag
Holder
Chamber
Safety
Filter
_i_ CAUTION
Check the
bag dust
chamber
and the
motor safety
filter for dirt
or clogs.
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet
freshener, face powder, fine dust,
plaster, soot, etc. can clog the bag
and cause it to burst before it is full.
Change bag more often when
vacuuming these materials.
Note: Always check motor safety filter
for clogs. See MOTOR SAFETY FILTER
CLEANING section Page 1Z
TO REPLACE DUST BAG
Fold the tab Dust
on the new Bag
dust bag
away from the /__.,=_-_- Tab
opening that _" '\\x!_:_ ....
Note: See
PARTS AND FEATURES for Bag number
Page 5.
Insert the dust bag onto
the dust bag holder
completely by holding
the bag coliar_
Place the dust bag collar into position.
Tuck the 4 corners __
of the bag into bag
chamber as shown _"_il-
here. Be sure the _!/' BagCover
bottom and sides _i i_
of the dust bag are _!!__ ..
completely within
bag cavity prior to
closing the bag
cover,
Close the dust bag
cover.
You will hear a
distinct snap when
cover is securely
closed.
Check to see that the dust bag is fully
placed inside the bag chamber.
16