Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
STEP 1:
Straighten Hose
Remove hose from box and lay
it out in the sun to straighten.
STEP 3:
Clean System
A. While the hose is
relaxing, clean and
backwash your fil-
ter system, skimmer
and
pump baskets.
B. Close Main Drain if
your pool has one.
C. Start Pump.
For parts or assistance, call Flotec Customer Service at
922 0594
924 0594
STEP 5:
Submerge Cleaner
A. Start pump.
B. Turn cleaner upside down,
submerge, and feed hose down
side of pool wall to fill hose
with water.
STEP 2:
Check Parts
Make sure you
have all parts to
pool cleaner.
STEP 4:
Assemble Cleaner
A. Insert swivel assembly into
cleaner body and twist 1/4
turn clockwise to lock.
B. Set brush adjuster to '0'.
C. Slide long hose cuff
over swivel assembly
to install hose.
1-800-365-6832
Reducer
Swivel
Cone
Assembly
Vacuum
Hose
Regulator
Long Hose Cuff
Swivel
Assembly
5
Publicidad
