UTILITY/LAUNDRY SINKS
Glen Falls
Park Falls
River Falls
ENTERTAINMENT SINKS
Addison
Aperitif
Entertainer
Napa
Sorbet
Trieste
Urbanite
INSTALLATION
REMOVE EXISTING SINK
S
Turn off the water supply to the faucet.
S
Open the faucet valves; then disconnect the supply lines.
S
Disconnect the drain assembly, and remove the trap.
S
Remove the existing sink.
INSTALL NEW SINK:
S
Determine the desired location for the sink.
S
For the Trieste (K-5914) or Entertainer (K-6558) sinks,
use the template packed with the product to draw the cut
line.
S
For other sinks, draw the cut line based upon the
measurements provided in the Cut-Out Information table
on Page 2. Provide adequate clearance between the
sink and backsplash. Double check your measurements.
S
Drill a 1/2" (1.3cm) pilot hole on the inside of the cut line.
S
Carefully cut out the countertop opening with a saber or
keyhole saw.
Kohler Co., Kohler, WI U.S.A.
K-6749-*
25" (35,6cm) x 22"
K-6580-*
21" (35,6cm) x 22"
K-6703/04-*
25" (35,6cm) x 22"
K-6552
13" (35,6cm) x 13"
K-6560-*
16" (35,6cm) x 19"
K-6558-*
22" (55,9cm) x 11"
K-5847L/5847R/5847-*
18-3/8" (46,7cm) x
K-5901-*
15" (35,6cm) x 15"
K-5914-*
43" (109,2cm) x 22"
K-5918-*
25" (63,5cm) x 22"
23-1/2" (59,7cm) x 20-1/2"
(55,9cm)
19-3/4" (50,2cm) x 20-3/4"
(55,9cm)
23-1/2" (59,7cm) x 20-1/2"
(55,9cm)
11-3/4" (29,8cm) x 11-3/4"
(27,9cm)
14-3/4" (37,5cm) x 17-3/4"
(27,9cm)
Use template
(27,9cm)
17-1/2" (44,5cm) x 19-1/8"
20-7/8" (53cm)
13-3/4" (34,9cm) x 13-3/4"
(27,9cm)
Use template
(55,9cm)
23-3/4" (60,3cm) x 20-3/4"
(55,9cm)
Draw Cut Line
3
1" (2,5cm)
(52,1cm)
1" (2,5cm)
(52,7cm)
1" (2,5cm)
(52,1cm)
1" (2,5cm)
(29,8cm)
2-3/8" (6cm)
(45,1cm)
Use template
1" (2,5cm)
(48,6cm)
2-1/8" (5,4cm)
(34,9cm)
Use template
1" (2,5cm)
(52,7cm)
Faucet
Supply Lines
Shut-Off Valve
Drain Assembly
A
1007256-2-