Publicidad
Idiomas disponibles
Idiomas disponibles
No change in measurements
with drain shown. (K-7273)
Note: Pump/Piping Protrudes Beyond Rim
1-3/16"
(3 cm)
23-3/16"
22"
(58.9 cm)
(55.9 cm)
Product Information
Applicable product:
Bath whirlpool with Spa/Massage Experience
Fixture*:
Bathing well:
Basin area, bottom
Basin area, top
Weight
To overflow:
Water depth to rim
Capacity
* Approximate measurements for comparison only.
Included component:
Cut-out template
Pump
Heater
1.5 kW
Required accessory:
Clearflo horizontal overflow bath drain
1023254-1-C
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H Min
K-1110-V
42" (106.7 cm) x 25-1/2" (64.8 cm)
63" (160 cm) x 31-1/2" (80 cm)
160 lbs (72.6 kg)
19-1/4" (48.9 cm)
96 gal (364.4 L)
1016369-7
V
Hz
A
240
50/60
15
K-7273
46"
(116.8 cm)
2-3/4"
(7 cm) Max
1-3/8"
(3.5 cm)
6" (15.2 cm)
7/16" (1.1 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 43
lbs/square foot (209 kg/square meter) loading.
Pump/piping protrudes beyond rim (see above).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
2
12-3/16"
(31 cm)
72" (182.9 cm)
208-240 V, 20 A, 50/60 Hz
3-15/16"
(10 cm)
23"
(58.4 cm)
6-3/8"
(16.2 cm)
1-1/2" OD
Kohler Co.
Publicidad
