Publicidad
Idiomas disponibles
Idiomas disponibles
3. Secure the back brace, back leg and front leg
using two 3¼" carriage bolts, two washers, and two
locknuts. Do not overtighten. (See Figure 3)
NOTE: Bolts enter through the outside of the unit
and are fastened from the inside.
Figure 3
3¼" Carriage Bolt
4. Pull the front leg out from the unit as shown.
(See Figure 4)
Figure 4
PAGE 2 OF 6
ASSEMBLY CONTINUED
Locknut
Washer
Front Leg
1-800-295-5510
uline.com
5. Attach one leg brace to a side using two 2¼" carriage
bolts, two washers and two wing nuts. (See Figure 5)
NOTE: Leg brace attaches to the inside of the
front leg and outside of the back leg.
Figure 5
6. Repeat step 5 to attach the other leg brace.
NOTE: Additional hardware can be used to
install eyewash station. Mounting bracket is
included with the eyewash station.
NOTE: When attaching an eyewash station,
refer to the installation instructions included
with the unit.
Leg Brace
0421 IH-5193
Publicidad
