Din Radio Provision With Pocket - Metra 99-6513B Instrucciones De Instalación

DIN radio provision with pocket

1. Remove the metal "DIN" sleeve
from the aftermarket radio.
2. Slide the sleve into the radio
housing and secure by bending
the metal locking tabs down.
(Figure A)
3. Slide the radio back into the sleeve
until it clicks in. (Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
(Figure B)
99-6513B
ISO DIN radio provision with pocket
1. Remove the metal "DIN" sleeve
and trim ring from the aftermarket
radio.
2. Mount the ISO brackets to the
radio with screws supplied with
the radio. (Figure A)
3. Slide the radio into the radio
housing until the side clips engage.
(Figure B)
4. Snap the ISO trimplate into the
radio housing. (Figure B)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble the dash in reverse
order of disassembly.
3
(Figure A)
(Figure B)