Iso Din Radio Provision With Pocket; Double Din Radio Provision - Metra 99-7524B Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Slide the radio into the radio
brackets/pocket assembly and
secure with the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
5. There are no existing holes for the
radio mounting. New holes will be
made using the included one inch
screws. The radio brackets will
rest on a shelf in the sub-dash. Be
sure the radio is level and centered
while mounting the radio/ bracket
assembly into the dash opening.
Continue on next page
Kit Assembly
(Figure A)
(Figure B)
99-7524B

Double DIN radio provision

1. Attach the double DIN radio to the
radio brackets using the screws
supplied with the radio. (Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash.
3. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
4. There are no existing holes for the
radio mounting. New holes will be
made using the included one inch
screws. The radio brackets will
rest on a shelf in the sub-dash. Be
sure the radio is level and centered
while mounting the radio/ bracket
assembly into the dash opening.
Continue on next page
8
(Figure A)