Recommended Tools - Uline H-2058 Manual Del Usuario

RECOMMENDED TOOLS

Flat Head Screwdriver
Figure 9
Figure 10
Figure 11
Figure 12
PAGE 6 OF 18
OPTIONAL OUTLET ASSEMBLY
Hammer
1.
2. Using protective gloves, reach into the inside of desk
3. Remove top and bottom screws from outside facing
4. Insert outlet into desk top cut-outs with oval outlets
5. Insert plastic cable ring and cover into the back
1-800-295-5510
uline.com
NOTE: Mounting hardware comes pre-installed
in outlet.
NOTE: Metal perforation must be removed prior
to outlet installation. Follow recommended
steps below.
Locate metal perforated electrical cut-outs on left
side of desk top. Place flat head screwdriver on one
end of perforation and hold firmly in place. Using
a hammer, tap the handle end of screwdriver until
metal perforation breaks off on one side.
(See Figure 9)
top and bend the perforation until other side breaks
away from desk top.
(See Figure 10)
oval holes of outlet assembly. (See Figure 11)
facing the outside of desk top. Secure to desk top
with the two screws removed in step three.
(See Figure 12)
panel from the front of the desk.
0221 IH-2058