Changing The Sound And Display Settings; Adjusting The Frequency Of The Subwoofer(S) - Sony BBE CDX-C880 Manual De Instrucciones

Changing the sound and
display settings
The follow items can be set:
•Clock (page 7).
•D.Info (Dual Information) - to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•Amber/Green - to change the illumination
color to amber or green.
•Dimmer - to change the brightness of the
display.
— Select "Auto" to dim the display only
when you turn the lights on.
— Select "on" to dim the display.
— Select "off" to deactivate Dimmer.
•Contrast - to adjust the contrast if the
indications in the display are not
recognizable because of the unit's installed
position.
•Voice guide function for vocalized comments.
— Select "Voice 1" to minimize the volume
EN
of the guide.
— Select "Voice 2" to be louder the volume
than "Voice 1".
— Select "Voice 3" to maximize the volume
of the guide.
— Select "Voice off" to deactivate Voice
guide.
•Beep - to turn on or off the beeps.
•RM(Rotary Commander) - to change the
operative direction of the controls of the
rotary commander.
— Select "norm" to use the rotary
commander as the factory-set position.
— Select "rev" when you mount the rotary
commander on the right side of the
steering column.
•BBE-to enjoy bass and treble even at low
volume. The bass and treble will be
reinforced.
— Select "BBE 1" to reinforce the bass and
treble.
— Select "BBE 2" to reinforce the bass and
treble more effective than "BBE 1."
— Select "BBE off" to deactivate BBE.
•DF (Digital Filter) to select the type of filter
you want, you can adjust the sound to much
your unit, your speaker, the music source,
etc.
— The digital filter appear its presetted
when you select "normal."
— The pre-ringing and post-ringing will be
minimize when you select "slow."
•LPF (Low Pass Filter) (page 19).
•A.Scrl (Auto Scroll) (pages 9, 19).
1
Press (SHIFT).
18
2
Press (3) (SET UP) repeatedly until the
desired item appears.
Each time you press (3) (SET UP), the item
changes as follows:
Clock n D.Info* 1 n Amber/Green n Dimmer
n Contrast n Voice*
n DF* 2 n LPF* 1 n A.Scrl*
1 When you have not tune the station or there
*
is no CD/MD being played, these items will
not appear.
2 DF does not work when the disc playback in
*
optional CD/MD changer.
Notes
• The displayed item will differ depending on
the source.
• If an optional digital preamplifier is
connected to the unit, BBE and Voice guide
do not work.
3
Press (5) (n) to select the desired
setting (for example: on or off).
For the "Contrast" setting, pressing (5)
(n) makes the contrast higher, and
pressing (2) (N) makes the contrast lower.
4
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Adjusting the frequency
of the subwoofer(s)
To match the characteristics of the connected
subwoofer(s), you can cut out the unwanted
high and middle frequency signals entering
the subwoofer(s). By setting the cut-off
frequency, the subwoofer(s) will output only
low frequency signals for a clearer sound
image.
1
Press (SOURCE) to select a source (radio,
CD or MD).
2
Press (SHIFT), then press (3) (SET UP)
repeatedly until "LPF" appears.
3
Press (5) (n) or (2) (N) repeatedly to
select desired setting.
Each time you press (5) (n) or (2) (N),
the cut-off frequency in the display changes
as follows:
LPF off ˜ LPF 80 Hz ˜ LPF 120 Hz
4
Press (SHIFT).
When the frequency setting is complete, the
display returns to the normal playback
mode.
1
n Beep n RM n BBE*
1
1