Preparing the rotary
commander
When you mount the rotary commander,
attach the label as shown in the illustration
below.
L IS T
M O D E
S O U N D
Setting the clock
The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1
Press (SHIFT), then press (3) (SET UP).
SET UP
1 Press (5) (n).
SET UP
The hour digit flashes.
2 Set the hour.
to go backward
to go forward
SET UP
SET UP
S O U N D
M O D E
L IS T
3 Press (5) (n).
SET UP
The minute digits flash.
4 Set the minute.
to go backward
to go forward
SET UP
2
Press (SHIFT).
SET UP
The clock starts.
3
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Note
If the POWER SELECT switch on the bottom of the
unit is set to the B position, turn the power on
first, then set the clock.
EN
7