Sony BBE CDX-C880 Manual De Instrucciones página 22

Erasing an entire program
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC
PLAY MODE
"P 1" indicates Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
2
Press (2) (N) repeatedly until "DEL"
appears.
PLAY MODE
To erase Program 2, press (5) (n)
repeatedly until "PGM 2" appears.
EN
3
Press (6) (ENTER) for two seconds.
PLAY MODE
The entire program is erased.
4
When you finish erasing programs, press
(4) (PLAY MODE) for two seconds.
5
Press (SHIFT).
22
TRACK
ENTER
ENTER
ENTER
Adding tracks to a program
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
PLAY MODE ENTER
"P 1" indicates Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
To select Program 2, press (5) (n)
repeatedly until "P 2" appears.
2
Press (2) (N) or (5) (n) to select the
track slot number where you want to
insert a track.
Track slot number
DISC TRACK
PLAY MODE ENTER
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) momentarily to enter
the track.
The current track is inserted in that slot
number and the succeeding tracks shift
down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled,
"*Mem Full*" appears in the display, and you
cannot insert more tracks.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).