Ilox SLS-1+ Manual De Instrucciones página 11

Important!
The SLS-1 controller may only be installed by qualified electricians.
+
Please observe and follow all standards, rules & regulations applicable
in your country!
Resetting all settings (»RESET«)
Select »MAN« by using the knob. In the display you will see »Auto«. Press the
knob for 5 seconds until a bleep sounds. READY!
Inquiry about the software version
Turn the knob one step beyond the menu item »Main« so that NO menu is
selected and NO green menu LED is lit up. Now hold the knob pressed for
at least 5 seconds until the term »Soft« and the current version number
(e.g. 2.05) is indicated alternately on the red display.
Error messages (display)
Error source
E 0 to E 3 Error inside µC-RAM section
E 10
Program »TIMER« faulty:
Start time = Stop time
E 11 Program faulty:
Total dimmer time is greater
than the timer time
E 99 Internal BACKUP data error
Solving error
Processor defective, replacing the
device necessary
Reset or adjust program.
Correct program »DIM TIME«
or »TIMER«
Restore ex-works program using
»RESET«
11