Ilox SLS-1+ Manual De Instrucciones página 5

2. »TIMER« (setting switch time)
This menu function can only be used when the internal software timer (see CLOCK)
is activated. By using the turn & press knob you can program 2 time values:
n Example: start time of sunrise 06.45 (= 06.45 o'clock)
n Example: start time of sunset 20.30 (= 20.30 o'clock).
When menu item »TIMER« is selected in the automatic mode, you will see the
2 programmed times alternately for control purposes.
3. BOOST (brief increase analogue signal output)
For an optimal ignition of the dimmable fluorescent tubes, the analogue output
voltage (1–10V) can be briefly increased at the starting moment (inputs of
0.0-5.0 seconds possible), via menu item »BOOST« and the turn & press knob:
n Example: time value for boost phase of 1.0 (= 1 second).
When menu item »BOOST« is selected in the automatic mode, you will see the
programmed time for control purposes.
4. DIM TIME (duration of the two dimming phases)
With help of the turn & press knob, you can program 2 dimming phases
successively (1 min to 2 hours and 59 minutes):
n Example: duration dimming phase morning 0.15 (= 15 minutes)
n Example: duration dimming phase evening 1.10 (= 1.10 minutes).
When menu item »DIM TIME« is selected in the automatic mode, you will see
the 2 programmed times alternately for control purposes.
5. DIM MIN (Minimum brightness value and optional
MIN brightness shut-off delay)
Under menu option »DIM-MIN«, a minimum value (minimum brightness of
1–99 %) and a possible shut-off delay of this minimum brightness (OFF or 1 to
10 minutes in the evening) can be programmed for the analog control signal.
5