Customer Service; Mounting The Wheels - Look 986 Manual Del Usuario

GB
INSTALLATION OF THE FRONT
AND REAR DERAILLEUR
Check that the thread of the rear derailleur
is clean and free of debris.
The frame is designed to use a "Clamp-On"
front derailleur:
Follow the manufacturer's
instructions, adjustment and maintenance
indications.
ATTENTION: The mounting of the "Clamp-
On" front derailleur should be done at
a maximum torque of 7 Nm. If it is not
sufficient for a good fastening of the
derailleur, then use some anti-rotation
paste for carbon components of Tacx
Dynamic type.
MOUNTING THE WHEELS
Follow the manufacturer's
instructions.
Before riding make sure that the wheels
are tightly clamped by the quick release
mechanism.
24
MAINTENANCE
Always clean your frame with soap or a light
detergent and water.
Use a soft cloth. Rinse your frame with water
and dry it with a cloth.
mounting
Do not use a high pressure cleaning device,
or abrasive products.
To eliminate tar stains, use a product for car
bodies.
CUSTOMER SERVICE
In spite of the care brought in manufacturing,
if a defect appears or if a repair is necessary,
always ask your dealer and present your
proof of purchase.
assembly