Connecting Cables - Ezviz Bullet Manual Del Usuario

3

Connecting Cables

Connect the power cable and network cable.
Add the camera to your EZVIZ account. If the camera is
added before, it will connect to the same account automati-
cally after connecting the power and network cables.
If the camera is connected to a Wi-Fi network before, it will
connect to the same Wi-Fi automatically after connecting
the power cable.
4
Adjusting the Surveillance Angle
- Loosen the adjusting screw and adjusting knob.
- Adjust the surveillance angle to your desired place.
- Tighten the adjusting screw and adjusting knob after finishing.
0 to 360°
microSD
Card Slot
Make sure the microSD card slot facing downward for
water-proof performance when you adjust the camera
surveillance angle.
0 to 180°
6
Adjusting Knob
Adjusting Screw