Promise Technology FASTTRAK TX4660 Guia De Inicio Rapido página 11

4. Boot the VessRAID subsystem first. Wait 30 seconds and boot the Host PC.
The Promise onboard BIOS displays the opening screen (below):
If you see "VessRAID" in the BIOS screen, the VessRAID subsystem is
properly connected to the TX8668 card.
The number following the VessRAID model reports the number of logical
drives present on the VessRAID subsystem.
For logical drive creation and RAID management, use one of the embedded
applications on the VessRAID:
• Command Line Interface (CLI)
• Command Line Utility (CLU)
• WebPAM PROe
Refer to the Online Help, VessRAID Quick Start Guide, or VessRAID Product
Manual for more information.
This concludes the setup procedure for the FastTrak TX8668.
11
Connecting the TX8668