Task 5: Installing Software Drivers; Task 6: Installing Webpam; Operating System Support - Promise Technology FASTTRAK TX4660 Guia De Inicio Rapido

FastTrak TX4660, TX8660, TX8668 Quick Start Guide

Task 5: Installing Software Drivers

Drivers for Windows and Linux are included on the CD that came with your
FastTrak card. Please download the latest drivers from the Promise
website.
Windows systems usually recognize the FastTrak card, prompt you for the driver,
and perform the driver installation automatically.
If you are installing the FastTrak card at the same time as your operating system
or you prefer to read step-by-step directions, see Chapter 3 of the FastTrak
TX4660, TX8660, TX8668 User Manual on the software CD.

Task 6: Installing WebPAM

The following instructions are adequate for most users. For complete installation
instructions, see Chapter 2 of the FastTrak TX4660, TX8660, TX8668 User
Manual on the software CD.

Operating System Support

On the Host PC where you install the FastTrak controller and WebPAM, Promise
Technology recommends:
• Windows Vista Business,
Enterprise, or Ultimate
• Windows Server 2008
• Windows Server 2003
• Windows XP Professional
WebPAM supports these operating systems. Choose one of them to take full
advantage of all the features of WebPAM.
You must be partition and format your new logical drive before you
can use it. Use the same method of partitioning and formatting a
logical drive as you would any other fixed disk added to your
computer system.
Important
• Windows 2000
• Red Hat Enterprise Linux 4 Update 6
• Red Hat Enterprise Linux 5 Update 2
• SuSE Linux Enterprise Server 9 SP4
• SuSE Linux Enterprise Server 10 SP2
16
support