Team kalorik TKG FT 1008 Manual Del Usuario página 13

Fax +32 2 359 95 50

desired cooking temperature. This type of fat will solidify when the
appliance cools down.
Your appliance must never be switched on through an external

timer or any kind of separate remote control system.
Please note: Should the symbol

surface, you need to be careful when handling the product. This
symbol means: CAUTION, this surface may get very hot during
use.
The symbol
temperature, however the other metallic or non-metallic surfaces
can also become very hot during use and it is therefore advisable
to always handle them with care and if possible with the help of
isothermal gloves or other thermal protection. In case of doubt
concerning the temperature of a certain surface it is always
preferable to protect oneself.
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved and
competent to perform this kind of repairs in order to avoid all danger.
In case of need you should return the appliance to this electrician.
BEFORE USE
 Remove all packaging from the unit.
 Remove the lid, basket, handle and any accessory from the appliance.
 Before you use the deep fat fryer for the first time, we recommend that you clean the lid,
bowl, basket, handle and housing of the deep fat fryer with warm soapy water with a soft
cloth.
DISASSEMBLING THE DEEP FAT FRYER
 Remove the control panel from the appliance. To do this, gently pull the control panel
upwards until it is released.
 Take the interior bowl with your two hands and pull it up gently.
ASSEMBLING THE DEEP FAT FRYER
 Stand the appliance on a dry horizontal surface.
 Place the bowl back in the housing and push it downwards.
 Replace the control panel and the accessories. To replace the control panel, firmly slide
the control panel downward into the location grooves on the back of the housing until it is
locked.
NOTE: The appliance will only operate when the control panel is correctly fitted to the
outer jacket.
 Press the end of the basket's handle together, insert its pins into the holes foreseen on the
basket and unfold the handle of the basket until it is locked to allow rising the basket
easily.
 Put the remaining power cord length in the cord storage in the back of the appliance.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
is always put on the surface with the highest
13
Assembly page 13/64
be indicated on a certain
TKG FT 1008 - 150421