PAIR TWO 8-SERIES SPEAKERS TOGETHER FOR EVEN BIGGER SOUND
Two BRAVEN 8-series units (BRAVEN 805,
1100, BRV-HD, 850, and 855s) can be
paired together for left and right stereo using
"TrueWireless™" technology by following
these instructions precisely:
1. Disconnect all Bluetooth
connections
®
(if any) on your cell phone, tablet, or other
Bluetooth
®
source and remove any previously
paired 8-series speakers from your device.
2. Press and hold the Battery Check button
on both 8-series speakers for 5 seconds
5
until you hear a sonar sound from both speakers.
Within 30 seconds, a second beep will indicate a
TrueWireless™ connection between the speakers.
3. Follow the regular procedure to Bluetooth
®
pair your Bluetooth
device with either one of your
®
8-series units.
When you turn off either of the paired speakers while
connected in TrueWireless™, both speakers will turn
off. To regain TrueWireless™, press the Power Button
on both 8-series speakers within 5 seconds of each
other. Wait approximately 15 seconds.
Full manual and troubleshooting: braven.com/manuals
The speakers will automatically reconnect to each
other and to the previously connected device. You
will hear two beeps indicating TrueWireless™ is
reestablished.
TrueWireless™ Note
TrueWireless™ technology only supports one active
Bluetooth
®
connection to your device at the same
time. If any other Bluetooth
®
device (other than
the paired speakers) is simultaneously connected
to your device, the BRAVEN speaker's audio will
distort. If distortion occurs, power down all other
Bluetooth
®
devices in range of your device, other
than the paired 8-series speakers. Refresh the
Bluetooth
®
connections on your device by turning
Bluetooth
®
off and then back on. TrueWireless™
is now reestablished.
For troubleshooting and tutorial videos, please go
to www.youtube.com/bravenproducts
6