SCOPREGA BRAVO 100 Manual De Instrucciones página 5

1. CONSIDER WORK AREA ENVIRONMENT. Do not expose the pump to rain.
Do not use in presence of flammable liquids or gases.
2. Do not exercise the pump with the inlet port in contact with dust or water.
3. STAY ALERT. Watch what you are doing. Use common sense.
4. WARNING! RISK TO BREATHING. The compressed air from your pump is not safe for
breathing. Never inhale air from your pump or from a breathing device connected
to the inflator.
5. Never carry the pump by the hose.
BRAVO 100/101 and 110 is a new generation of Hand pumps for all kind of inflatable products.
The unique architecture grant high efficiency and easiness of use. The main features are:
• Double/Single action to minimize human effort
• Ergonomic handle with integrated air filter
• Inflation port on pump body (no hose kinking)
• Built-in pressure gauge
Characteristics:
Model
Type
Max pressure
Capacity
Inflate Modes
Construction
OPERATING THE PUMP
TO INFLATE
• Your pump is supplied with the standard nozzles that are located inside the carry bag.
• Connect the hose to the front of the pump and make sure that "Mode" Lever at the back
of the pump is in vertical position. Connect the hose to the inflatable.
• Start pumping... when it becomes too hard to pump turn 90° the Mode Lever. (Single Action)
• Continue pumping till reaching the recommended pressure of the inflatable
GENERAL SAFETY RULES
INTRODUCTION
BRAVO 100
Double/Single action
1.9 bar (27.5 psi)
2x2 liters c.a.
INFLATE
ABS + Aluminum
BRAVO 101
Double/Single action
1.9 bar (27.5 psi)
2x1.5 liters c.a.
INFLATE
ABS + Aluminum
BRAVO 110
Double/Single action
1.0 bar (14.5 psi)
2x2.5 liters c.a.
INFLATE and DEFLATE
ABS + Aluminum