Troubleshooting - SCOPREGA BRAVO 100 Manual De Instrucciones

TO DEFLATE (BRAVO 110 ONLY)
• Connect the hose to the front of the handle and make sure that "Mode" Lever at the back
of the pump is in vertical position.
• Connect the hose to the inflatable.
• Start pumping till the inflatable is empty.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Wrong Port connected Connect the air hose to the proper front Port
Pump will not inflate
Wrong setting on the Mode Lever Adjust settings
Dust inside the handle filter Disassemble the handle (unscrew the four screws)
and clean/ change the filter.
Gaskets or internal valves Contact your local dealer or authorized service center.
damaged
ACCESSORIES
Recommended accessories for use with your pump are available from your local dealer or
authorized service center.
WARNING: The use of any accessory not recommended for use with this pump could be
hazardous.