Ultradent Products VALO CORDLESS Manual Del Usuario página 3

VALO
®
Cordless
Curing Light
• If using the VALO Cordless LED Curing Light in the Standard and High Power Modes and in close proximity of the gingival tissue, DO
NOT expose tissue for more than 20 seconds. If longer curing time is required, consider a dual-cure product (composite or adhesive).
• In Xtra Power Mode, DO NOT expose soft oral tissue for more than 9 seconds. The Xtra Power Mode has a 2 second safety delay to
limit oral tissue heating during consecutive curing. If a longer cure is needed, consider a dual-cure product (composite or adhesive).
Product Information:
Indications for Use: The source of illumination for curing photo-activated dental restorative materials and adhesives.
The VALO Cordless curing light uses a custom, multi-wavelength (395 - 480nm) Light Emitting Diode (LED) for producing the high
intensity light capable of polymerizing all light cure dental materials. This intensity will also penetrate porcelain and is capable of curing
underlying resin cements similar to a quality halogen light.
The VALO Cordless curing light uses Ultradent VALO rechargeable batteries and battery charger.
Product Components:
• 1 – VALO Cordless curing light
• 4 – Ultradent VALO rechargeable batteries
• 1 – Ultradent VALO battery charger with medical grade 12VDC AC power adapter
• 50 – VALO Cordless Barrier Sleeves
• 1 - VALO Cordless Light Shield
1 – Handpiece surface mounting bracket with double stick adhesive tape
•
Overview of Controls:
Photo
Read all instructions before operating this unit.
The VALO Cordless LED curing light emits high intensity light waves and must only be used as
indicated in this manual.
WARNING
• DO NOT look directly into the light output. Patient, clinician and assistants should wear UV
orange eye protection when this device is in use.
• DO NOT expose soft oral tissues at close proximity. Maintain a safe distance between the lens
and the soft tissue.
Buttons and Lights
Power Button
Timing Lights
Low Battery - Safety Indicator
Mode/Status Light
Timing/Mode Change Button
Legend
3