Set The Date And Time - LG PCS400R Servidor Pro:Centric Instalación Y Configuración

7 Either:
• Type and press
then prompt you to reset the PCS400R:
Continue with step 8.
• Type and press
from step 4).
8 If you are ready to reset the system immediately, at the
"Reset the System" on page 37 for further information).
* Note: If you intend to modify additional configuration settings during the current session, you may wait
until all changes are complete before you reset the system.

Set the Date and Time

By default, the PCS400R is synchronized with an NTP server and configured for the US Eastern time zone. If the
PCS400R is connected to the Internet, the NTP client will periodically update the time setting on the PCS400R.
If the PCS400R is not connected to the Internet, you also have the option to specify date and time data manually.
Refer to "Set the Time Zone" above for information on setting the time zone.
1 Log in to the PCS400R as described on page 25.
2 At the
The system will display the current time (for example:
then initiate a series of prompts to enable you to set the time.
3 At each of the following prompts, type the year, month, and day, respectively. Note that all three of these fields
require numerical values. Press
If applicable, you can also press
4 At each of the following prompts, type the hour and minute, respectively. Note that the hour should be entered
in 24-hour format. Press
Once you enter the minute value, the system will display the new time and then prompt for confirmation, for
example:
5 Either:
• Type and press
example:
• Type and press
32
if the information in the display is correct. The system will confirm the setting and
to return to the initial location prompt and reset the time zone (repeat this procedure
prompt, type and press
after each entry.
at each prompt to accept the default value in square brackets.
after each entry.
to apply the new time configuration. The system will display confirmation, for
to return to the
prompt, type
.
prompt without changing the time configuration.
and press (see
) and