Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Identify the (2) mounting locations for each bracket by looking under the driver side of the vehicle and finding the (2) locations where the
vehicle body is mounted to the frame.
Driver side front
1
Beginning at the driver side front (location 1 above), remove the
Position running board in place and slide mounting
two (2) nuts from the studs to either side of the body mount bolt.
brackets over studs. Replace nuts on studs and loosely
Repeat at location 2 shown above.
tighten. Repeat at all (2) locations shown above.
Remove (2) nuts
Mounting bracket
2
3
Rotate running board so that it is properly parallel with the vehicle rocker panel. Securely tighten all running board bracket nuts.
4
Repeat Steps 1 thru 4 for passenger side.
Page 2 of 3
Publicidad
Tabla de contenido
