Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Steps
Identify the mounting locations for each bracket by
looking under the vehicle and finding (4) threaded
studs in the inner rocker panel.
Locate and remove the plug found on the
rocker panel underneath the stud. Repeat
for each bracket location
Front
Passenger side shown
Repeat for opposite side
2
Front
Passenger side shown
Repeat for opposite side
Begin bracket installation by locating upper hole on
bracket onto stud so that lower hole lines up with
hole in rocker panel. Secure bracket by threading
nut onto stud. Finger tighten hardware.
3
Front
Passenger side shown
2
12
PAGE
OF
10409
Rev B
Publicidad
Tabla de contenido
