1. Mount the ISO brackets to the radio with the
screws supplied with the unit. (Figure B)
Note XL-7 ONLY: Trim top corners of radio
housing. (Figure A)
2. Slide the radio into the radio opening until the side
clips engage. (Figure C)
3. Snap the trim plate into the radio housing. (Figure
C)
4. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-3305
ISO radio provision with pocket
(Figure A)
(Figure B)
9
Right side clip
(Figure C)