Changing Radio Type - Metra Electronics Axxess BX-CH34 Instrucciones De Instalación

Steering wheel audio control extra settings
Attention: The Axxess Updater App can also be used to program the following (3) sub-sections as well,

Changing radio type

If the LED flashes do not match the radio you have connected, you must
manually program the BX-CH34 to tell it what radio it is connected to.
1) After (3) seconds of turning the key on, press and hold the Volume-Down
button on the steering wheel until the L.E.D. in the BX-CH34 goes solid.
2) Release the Volume-Down button; the L.E.D. will go out indicating we are now
in Changing Radio Type mode.
3) Refer to the Radio Legend to determine which radio number is required for
your application.
4) Press and hold the Volume-Up button until the L.E.D. goes solid, and then
release. Repeat this step for the desired radio number you have selected.
5) Once the desired radio number has been selected, press and ho ld the Volume-
Down button on the steering wheel until the L.E.D. goes solid. The L.E.D. will
remain on for about (3) seconds while it stores the new radio information.
6) Once the L.E.D. goes off, the Changing Radio Type mode will then end. You can
now test the steering control wheel controls.
Note: If at any time the user fails to press any button for a period longer than
(10) seconds, this process will abort.
BX-CH34
pending that the interface has been initialized and programmed.
Radio legend
1. Eclipse (Type 1)
2. Kenwood
3. Clarion (Type 1)
4. Sony and Dual
5. JVC
6. Pioneer and Jensen
7. Alpine
8. Visteon
8
9. Valor
10. Clarion (Type 2)
11. Metra OE
12. Eclipse (Type 2)
13. LG
14. Parrot
15. XITE
16. Philips