Descargar Imprimir esta página

Westin 25-0770 Instrucciones

Ensambles de estribos

Publicidad

Enlaces rápidos

AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
25-0770
25-0775
26-0770
ITEM
QTY
1
2
STEP BAR, PASSENGER AND DRIVER
2
2
FRONT BRACKET
3
2
REAR BRACKET, PASSENGER AND DRIVER
4
4
REAR HOOK
5
8
1/2-13 X 1.75" HEX HEAD BOLT
6
10
1/2" FLAT WASHER
7
10
1/2" LOCK WASHER
8
2
M12-1.75 X 120MM HEX HEAD BOLT
1
2
ESTRIBOS, LADO DEL ACOMPAÑANTE Y EL CONDUCTOR
2
2
SOPORTES DE CARROCERÍA
3
2
PIEZAS DE SUJECIÓN TRASERAS, LADO DEL ACOMPAÑANTE
Y EL CONDUCTOR
4
4
GANCHOS TRASEROS
5
8
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 1,75"
6
10
ARANDELAS PLANAS DE 1/2"
7
10
ARANDELAS DE PRESIÓN DE 1/2"
1
2
MARCHE-PIEDS CÔTÉ CONDUCTEUR ET CÔTÉ PASSAGER
2
2
PIEZAS DE SUJECIÓN DELANTERAS
3
2
SUPPORTS ARRIERE, COTE CONDUCTEUR ET COTE
PASSAGER
4
4
CROCHET ARRIERE
5
8
BOULON A TETE HEXAGONALE DE 1/2-13 X 1,75 PO
6
10
RONDELLE PLATE 1/2 PO
7
10
RONDELLE A FREIM DE 1/2 PO
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions com-
pletely before beginning.
STEP 2.
Remove bolt from front body mounts located under cab of vehicle. Attach front bracket to body mount as
shown. Leave bolt loose to allow for positioning of step bar.
STEP 3.
Attach rear bracket to vehicle frame as shown.
covers the plastic inserts in frame. Position the rear hook over top edge of the frame using a 1/2-13 x 1.75" hex
head bolt, 1/2" lock washer and 1/2" flat washer through the top hole in rear bracket and thread into the nut on
the rear hook. Hand tighten.
STEP 4.
Repeat Step 3 to install the other rear hook.
emergency brake cables are not binding on it. Hand tighten.
STEP 5.
Attach step bar to bracket using 1/2" fasteners. Leave loose.
STEP 6.
Torque front body mount bolt to 65 FT.LBS. Tighten rear hooks gradually to keep rear bracket flat against truck
frame. Torque to 45 FT.LBS.
STEP 7.
Torque 1/2" fasteners to 65 FT.LBS. Repeat installation for passenger side.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 1995-99 TAHOE/YUKON 4 DOOR
APLICACIÓN: TAHOE/YUKON DE 4 PUERTAS, MOD. 1995-1999
APPLICATION: TAHOE/YUKON 4 PORTES 1995-99
CONTENTS -
CONTENIDO
- CONTENU
NOTE:
Make sure the clearance holes in the rear bracket
NOTE:
On the driver side, adjust bottom rear hook so the
TOOLS -
HERRAMIENTA
3/4" SOCKET
3/4" WRENCH
18MM SOCKET
15MM SOCKET
RATCHET
TORQUE WRENCH
DADO DE 3/4"
LLAVE DE TUERCAS DE 3/4"
DADO DE 18MM"
DADO DE 15MM"
MANERAL
LLAVE DE TORQUE
DOUILLE 3/4 PO
CLE 3/4 PO
DOUILLE 18MM
DOUILLE 15MM
CLIQUET
CLE DE COUPLE
WO:
137775
75-0557 REVISION 9/16/05
- OUTILS

Publicidad

loading

Resumen de contenidos para Westin 25-0770

  • Página 1 APPLICATION: 1995-99 TAHOE/YUKON 4 DOOR APLICACIÓN: TAHOE/YUKON DE 4 PUERTAS, MOD. 1995-1999 APPLICATION: TAHOE/YUKON 4 PORTES 1995-99 AUTOMOTIVE PRODUCTS, INC. STEP BAR ASSEMBLIES ENSAMBLES DE ESTRIBOS MONTAGES DE MARCHE-PIEDS 25-0770 25-0775 26-0770 ITEM CONTENTS - CONTENIDO - CONTENU TOOLS -...
  • Página 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
  • Página 3 INSTALLATION VIEW OF DRIVER SIDE SHOWN, PASSENGER SIDE OPPOSITE VISTA DE LA INSTALACIÓN DEL LADO DEL CONDUCTOR OPUESTO AL LADO DEL ACOMPAÑANTE ILLUSTRE: COTE CONDUCTEUR, EN FACE: COTE PASSAGER Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N.

Este manual también es adecuado para:

25-077526-0770