Tabla de contenido
Publicidad
SAFETY INSTRUCTIONS
observe the following notes.
1. Keep hands and clothing away from moving parts at all times.
2. Do not operate this machine under the influence of alcohol or while taking medication that impairs the senses or
reactions.
3. Make certain that the work area around the machine is clear of debris and obstructions.
4. Keep all unauthorized and untrained people away from the machine at all times.
5. Never let the mixer run unattended even for a brief moment.
6. Turn off the motor when you leave the machine.
7. Only use or operate the mixer on level ground to prevent the mixer from tipping over.
8. Do not abuse the power cord; i.e. Never yank on the cord to disconnect it. Keep the cord away from heat, oil, and sharp
edges.
9. Do not overreach while working with the mixer. Keep proper footing and balance at all times when loading or
unloading the mixer.
10. Never allow children or inexperienced operators to operate or repair the mixer.
11. Use only factory authorized parts for replacement.
12. Keep these operation instructions with the machine at all times.
13. Always wear safety glasses and safety shoes when operating and moving equipment.
14. Safety decals – replace missing or damaged safety decals.
MIXER INSTRUCTIONS
1.
LUBRICATION: There are grease fittings on all models. Apply any type of EP grease until grease begins to come out
of the bearings. LUBRICATE ALL FITTINGS BEFORE EACH USE.
2.
GEARBOX MOTOR: Mixer shipped with gear oil in gearbox. Change gear oil every 200 hours. Fill with 4 oz of 75w-90
gear oil.
3.
GENERAL: Check all screws for tightness before each use.
4.
MIXING: Do not insert sharp objects into the plastic mixing drum. Doing so will damage the drum. DO NOT USE
THIS MIXER FOR QUICK DRYING CEMENT, EPOXY CEMENT, OR FLOOR LEVELING COMPOUNDS!
5.
CLEANING: Do not spray water on or into the motor. Thorough cleaning of the mixer after each use is recommended
and will add to the service life.
EXTENSION CORD GAUGE CHART
Cord length
25'
14-3
50'
12-3
100'
10-3
Do not exceed 100' length total in extension cords
For the safety of yourself and others around you, it is extremely important that you
Gauge
Cord must be grounded. Make sure there are no cuts in cord.
Cord must be grounded. Make sure there are no cuts in cord.
Cord must be grounded. Make sure there are no cuts in cord.
Note
4
Publicidad
Tabla de contenido
